Showing posts with label Boom Barrier Manufacturers. Show all posts
Showing posts with label Boom Barrier Manufacturers. Show all posts

Friday, September 4, 2020

NIHVA - Boom Barrier Manufacturer


The proven and reliable combination of electric motor and lever system is a simple and extremely reliable drive solution. This allows a short opening and closing time without the boom barrier bouncing in the final position. The lever system locks the boom barrier at both ends. Even in the event of a power failure, you can easily move it by hand. The complete drive system is mounted in the barrier housing as a single unit and can easily be separated from the housing by removing the mounting screws. A built-in spring mechanism provides the boom barrier with precise balance. The spring must be factory set to accommodate the length of the boom before shipping. Depending, for example, if the boom barrier has been shortened or if the boom has signs attached, the springs can easily be reset in the field during assembly. It is also easy to change the on-site handling from the right axis to the left axis.

Drive unit

The barrier is driven by a torque motor mounted on a central cast aluminum support. The support also includes drive shaft bearings, gearbox, and counterbalance spring mounts. Torque motors are designed for alternating current. No limit switch or friction clutch is required. It is maintenance-free and can be stopped in any position without damage. In the end position, the motor remains powered and mechanically locks the boom barrier via the lever system. This minimizes power consumption. This power is dissipated in the form of heat, preventing condensation and corrosion. This ensures reliable and problem-free operation, especially in cold climate conditions. The built-in position sensor provides accurate boom barrier status information to the associated controller. The self-learning control unit ensures optimal braking without the boom barrier bouncing or swaying from its final position. The barrier is factory wired and tested, ready to connect and comes with all necessary mounting accessories.

Housing

The high quality, rugged housing is manufactured from 2mm zinc phosphate steel and powder coated with RAL 2000 (orange) for bleaching and no negative environmental impact. The control unit is mounted on a removable galvanized steel panel. The components inside the barrier housing are easily accessible through the maintenance door and removable top cover.

Available version

Barriers are supplied with the boom barrier attached to either the right or left side. In the standard configuration, the maintenance access door is located on the road side, but you can use one of the opposite doors if desired.

Boom Barriers

The boom barrier is extruded from a very stable aluminum alloy to produce a 100 mm x 55 mm x 1.6 mm octagonal profile, finished with a white powder coat of RAL 9010 and then a bright red reflective tape strip. Applies. If you want the boom barrier to be longer than 3.5 meters, you must install a pendulum post or a fixed post. If the available vertical height is limited, the barrier can be supplied with an articulated boom at an additional cost. To calculate the dimensions of an articulated boom, you must specify the barrier length (D =) and height (H =).

Control Unit

The MLC controller was developed especially by Magnetic. Using microprocessor technology to ensure a flexible and modern approach to control technology, MLC and auxiliary control unit with all suitable expansion options, including I/O box and serial communication interface, foldable mounting plate Is attached to.

Safety

Please observe the following safety instructions and country-specific accident prevention regulations for installation and operation.

NIHVA Technologies Best Automatic barriers, Boom Barrier manufacturers, suppliers & exporters in India. Contact for best service: Mob: + 91 8551091333, Email: sales@NIHVA.com

Thursday, August 27, 2020

Features of Boom Barriers

Boom Barriers



Boom Barriers are an ideal solution in tollgates, traffic control, parking lots and industrial buildings for vehicle control. These can be provided in openings ranging from 1 meter to 16 meters. The maximum boom length that can be used is 8 meters. For openings over 8 meters, two boom barriers can be provided by incorporating a master unit and a slave unit. Boom bars are available in round tubular or telescopic.

All barriers are suitable for outdoor applications with IP54 electrical protection. Robust for all types of applications with accessories such as photocells, loop sensors, flashlights, remote sensors, racks, mobile application support, articulation features Steel construction, scratch-resistant coating, compact size, trouble-free and smooth operation With excellent service backup, it is a very reliable product for your needs. Automatic boom barriers provide security at the exits and entrances of industrial units, offices, company housing, residential areas, parking lots, toll booths, etc. Automatic barriers can be used to better control pedestrian and vehicle traffic. It can be used for better security. The high-performance boom barriers provided by Gandhi Automation are suitable for all types of installation environments. A wide range of lengths and accessories are available to ensure that all installation requirements are met. All models have the ability to be manually operated and a battery backup function in case of power failure on some models.

Features of Boom Barriers

  • A wide range of models to suit different applications such as parking lots, condominiums, toll collections, industrial entrances, etc.
  • Supports boom lengths up to 8.4 m. The opening up to 16.8 m can be covered with two barriers acting as master/slave
  • Very compact size and very quiet operation
  • Rugged steel construction with scratch-proof coating to withstand harsh weather conditions
  • Allows integration with a wide range of accessories and all types of access control systems
  • Very reliable and maintenance free. Tested and distributed worldwide
  • Manual release in case of power failure. Battery backup function for some models